The installation steps of bamboo and wood fiber grille plate are as follows:
- Prepare
Tools: electric drill, screwdriver, level, tape measure, pencil, saw, etc.
Materials: Bamboo and wood fiber grille plate, keel, screws, glue, etc.
- Measurement and planning
Measuring the wall: Measure the wall size with a tape measure to determine the installation position of the grille plate.
Planning layout: Plan the arrangement of grille panels according to the measurement results, and mark the installation line on the wall if necessary.
- Install the keel
Fixed keel: Install the keel on the wall according to the marked line, ensuring horizontal and vertical, using an electric drill and screws, usually 30-60 cm apart. - Cut the grille
Cutting on demand: Cut the grille plate with a saw according to the actual size to ensure smooth edges. - Install the grille
Fix the grille plate: Install the cut grille plate on the keel and fix it with screws or glue to ensure that it is firm.
Maintain level: Use a level during installation to ensure that each board is level.
- Check and adjust
Check the installation: After the installation is complete, check whether each grille plate is firm and smooth, and adjust it if necessary.
Step 7 Clean up
Clean up the site: After installation, clean up tools and materials to keep the site clean.
Matters needing attention
Moisture-proof treatment: In a humid environment, the wall should be moisture-proof treatment.
Leave expansion joints: leave appropriate expansion joints during installation to prevent thermal expansion and contraction deformation.
Follow the above steps to complete the installation of bamboo and wood fiber grille plate.
