Bamboo and wood fiberboard ceiling is an environmentally friendly, beautiful and practical decorative material, and its installation method needs to follow certain steps and precautions. The following is a detailed explanation of the installation method of bamboo and wood fiberboard ceiling:
- Preliminary preparation
Tools: screwdriver, electric drill, ruler, pencil, cutting machine, level.
Materials: bamboo and wood fiberboard, keel (C type or U type, according to the size of the room), self-tapping nails, glue, waterproof paint or protective film.
Site preparation: Ensure that the construction site is clean and tidy to avoid affecting the construction effect. - Measurement and cutting
According to the design drawing and the actual size, use a ruler and pencil to measure on the wall or top to determine the size and position of the bamboo and wood fiberboard.
Use the cutting machine to cut along the measured lines, ensuring that the incision is neat and smooth.
Third, install the keel
Horizontal keel installation: in the top of the room or the wall evenly installed horizontal keel, keel spacing is generally 500mm~600mm, according to the actual situation adjustment.
Vertical keel installation: fixed vertical keel on the horizontal keel, vertical keel spacing is generally 300mm~400mm, adjusted according to the actual situation, pay attention to vertical keel and vertical keel.
Secure the horizontal keel and vertical keel to the wall or top using self-tapping nails to ensure secure fixation.
Four, installation of bamboo and wood fiberboard
Place the cut bamboo and wood fiberboard on the keel, ensuring that the joint between the bamboo and wood fiberboard and the keel is tight.
Use an electric drill to drill holes at the edges of the bamboo and wood fiberboard, and then insert self-tapping nails to fix it. Or use special glue for bonding to ensure the flatness and verticality of bamboo and wood fiberboard to avoid warping.
Repeat the above steps to install the remaining bamboo and wood fiberboard to the wall or top. - Inspection and repair
After the installation is completed, carefully check whether the bamboo and wood fiberboard is smooth, if there is warping phenomenon, repair in time.
Check whether the joint between the bamboo and wood fiberboard and the wall or top is tight, and repair it in time if there is loosening. - Cleaning and protection
After the construction is completed, clean up the construction site and keep the wall or top clean.
Protective treatment of bamboo and wood fiberboard, such as applying waterproof paint or covering protective film, to extend the service life. - Precautions
During the installation process, it is necessary to ensure the quality of the keel and the installation process, so as not to affect the quality and service life of the entire ceiling.
When cutting bamboo and wood fiberboard, ensure that the incision is neat and smooth to avoid affecting the appearance and installation effect.
When installing bamboo and wood fiberboard, pay attention to waterproof and moisture-proof, especially when used in wet environments such as bathrooms and kitchens, it is necessary to strengthen waterproof treatment.
After the installation is completed, it is necessary to check and maintain the bamboo and wood fiberboard ceiling regularly, clean up dust and debris in time, and keep it clean and beautiful.
To sum up, the installation method of bamboo and wood fiberboard ceiling needs to follow certain steps and precautions, only to ensure that each step is correctly completed, in order to ensure the quality and beauty of the ceiling.
