The installation steps of bamboo and wood fiber wallboard usually include preparation, measurement and cutting, keel installation (if necessary), installation of wall panels, and inspection and repair. Here is a detailed guide to the installation steps:
- Preparation
Tools: Ensure that tools such as a screwdriver, electric drill, ruler, pencil, cutting machine, and level are available.
Materials: Prepare bamboo and wood fiberboard, self-tapping nails (or steel fasteners, gun nails), glue (such as structural glue, nail free glue), keel (if necessary) and other materials.
Site preparation: Ensure that the construction site is clean and tidy to avoid affecting the construction effect. - Measurement and cutting
Measuring the wall: Use a ruler and pencil to measure on the wall to determine the size and position of the bamboo and wood fiberboard.
Cutting sheet: According to the measured size, use the cutting machine to cut along the line to ensure that the incision is neat and smooth.
Third, install the keel (if necessary)
Fixed transverse keel: fixed transverse keel on the wall, keel spacing is generally 500mm~600mm, adjusted according to the actual situation.
Fixed vertical keel: Fixed vertical keel on the horizontal keel, vertical keel spacing is generally 300mm~400mm, adjusted according to the actual situation, and ensure that the vertical keel and vertical keel.
Fixed keel: Use self-tapping nails to fix the keel on the wall to ensure that it is firmly fixed.
Fourth, install the wall panel
Install the first board: Place the first piece of bamboo and wood fiberboard on the keel or wall according to the installation sequence (such as left and right first, Yang Angle before female Angle, etc.), and fix it with steel fasteners, gun nails or self-tapping nails. If you encounter the position of the power panel or socket, reserve the socket port and cut the hole in advance.
Install the subsequent plates: Install the subsequent plates on the wall in turn, one side of each plate is fastened on the previous plate, and the other side is fixed with steel fasteners, gun nails or self-tapping nails. Make sure the seams between the sheets are tight and smooth. - Inspection and repair
Check the flatness: After the installation is completed, carefully check whether the bamboo and wood fiberboard is smooth, if there is warping phenomenon, repair in time.
Check the joint: check whether the joint between the plate and the wall is tight, if there is loose phenomenon, repair in time. At the same time, check whether the joints between the plates are smooth and beautiful. - Cleaning and protection
Clean up the site: After the construction is completed, clean up the construction site and keep the wall clean.
Protection treatment: Protection treatment of bamboo and wood fiberboard, such as applying waterproof paint or covering protective film, to extend the service life.
Please note that during the actual installation process, adjustments and optimizations may need to be made according to the specific situation. At the same time, read the product manual and installation guide carefully before installation to ensure correct and safe installation.
